Instructions for the use and maintenance of older equipment
Instructions for the use and maintenance of older equipment
Instructions for the use and maintenance of AW 1700, 1900, 2000 and Combo central vacuum cleaners
Instructions for the use and maintenance of CV 1750 and CV 1950 central units
Instructions for the use and maintenance of radio-controlled C series central units
Instructions for the installation and use of DR2 remote controls
Instructions for the installation and use of CX wall inlet controls
Instructions for the installation and use of DR1 remote controls
Instructions for the installation and use of CV-1100 and CV-1350 central units
Replacing a dust bag and filter in CV-1350-B-EU-CA central vacuum cleaners
These instructions are suitable for central units that were manufactured for the Finnish market between June 1991 and June 1993. The instructions are valid if the model’s structure has not been upgraded since then. The models CV-1100 and CV-1350 were manufactured from 1986 onwards and from the summer of 1993 to the end of 1997. Older central units are equipped with a washable textile filter but not with thermal protectors. Newer central units manufactured after 1993 feature not only thermal protectors but also overload protection, the operation of which was described in the instructions for the newer product.
Instructions for the installation of Allaway central vacuum cleaning systems
These instructions are suitable for sites where Classic cover assemblies will be installed.
Instructions for the installation and maintenance of Kaikki Pois central vacuum cleaning systems
Installation instructions from the late 1980s for a central vacuum cleaning system with 41 mm piping. The installation instructions include instructions for the use of KP-1000 Junior, KP-1400, CV-1100 and CV-1350 Parmair central units. CV-1100 and CV-1350 Parmair central units are equipped with a textile filter.
Replacing the filter in KP-1000 Junior central units
Allaway no longer offers textile filters for the KP-1000 Junior model. Allaway recommends that the structure of KP-1000 Junior central units be upgraded by having a fine filter installed at an authorised Allaway service dealer.
Instructions for the installation and use of KP-1500 and KP-1800 central vacuum cleaners
These instructions are suitable for KP-1500, KP-1500-Eu, KP-1800 and KP-1800-Eu central units that were manufactured between 1990 and 1993 (June). The instructions are valid if the device’s structure has not been upgraded since then. Starting from June 1993, KP-1500-B-Eu and KP-1800-B-Eu central units were equipped with an overload protector and a turbine overheat protector, the operation of which was described in the user manuals for the devices in question.
Instructions for the use of preseparator EE-10
Instructions for the use of preseparator EE-22
Instructions for the installation and use of Ufox-Santra central vacuum cleaners
